توضیحات تکمیلی
| Gas Inlet | Male connection for rubber hose Φint 10 |
|---|---|
| Gas Outlet | Male connection for rubber hose Φint 6 |
| Maximum working pressure | 3.0 bar (0,3 Mpa) |
| Flow rate | 47 cc/inj ± 3% (at 20 msec and 2,5 bar) |
| Inlet pressure | 2,0 bar (reducer outlet pressure) |
| Minimum opening time | 2.8 ms |
| Electrical output | Temperature sensor signal |
| Electrical input connection | 4xcoil – 4x AMP superseal 2 way male contact |
| Injector coil nominal resistance | 3 Ohm |
| Injector control electrical current | 4/1 A |
| Burst pressure | 10 bar |
| Gas seal requirement | External leak rate < 15 cc/h |
| Present – union with φ4/5 fitting for rubber pipe | Union for gas pressure measure |
| Present-2 way FCI sicma2 connector with female contact | Injectors temperature sensor |
| Working temperature | Environment: -40 / +120 °C |
| Position inside the vehicle | Well fastened on the engine, closed to the intake manifold. Solenoid valves in vertical position. |
| Overall dimensions (mm) | 62 x 158 x 59 |
| Weight | 200g |
| Homologations | R110.00 |
نقد و بررسیها
هنوز بررسیای ثبت نشده است.